PPMP20009 Leading Lean Project
Individual Assessment (40%)
Length: 2500 – 3000 words (excluding references and appendix)
Case: Implementing lean project management to build your dream home
You have taken up a new job in Perth, Western Australia. Both your partner and you are very keen on wanting to build your own home. You come across the Keystart initiative (https://www.keystart.com.au/) by the government of Western Australia and have found out that you and your partner are eligible to apply. You have decided to submit an application, but will have to do the following:
- Identify the suburb you want to build and decide the land size you want to buy (this will depend on the budget you are willing to spend on the land)
- Research the market and identify potential home builders who will construct your dream home.
- Finalise the layout /design and agree on the cost to build the house with the chosen builder
- Enter into a deal: (1) Sign a land contract with the land developer – you will need to pay a deposit of AUD$2000 and (2) Sign a Pre-Work Construction (PWC) contract with the builder – you need to pay a deposit of AUD$2000
(in both contracts you have inserted the following clause: Deposit to be returned to client (in full) in the event of failure to obtain finance approval).
- Finally, you are now ready to submit an application to Keystart (can be done through the builder) to obtain finance to build your dream home.
The above activities can be efficiently managed through key project management processes. Where possible, you can also aim to implement lean project management principles to successfully manage the above activities.
Answer the following questions:
- Select and explain the project management processes (either from PMBOK or PRINCE2 or a combination of any best practices you have learned in this unit) that can help you:
- Choose the suburb and decide the land size
- Chose the best builder
- Identify the stakeholders for the project
- What are the factors that will influence the design and layout of your dream home?
Explain the project management processes you used to determine the design/layout.
- Explain how you would implement lean best practices to achieve lean project management for (1) and (2) above.
Your assignment will be assessed on the extent and quality to which it meets each of the following criteria:
|1||Correct project management processes are selected and explained in detail for the following:|
|a) Choosing the suburb||3|
|b) Deciding the land size to buy||3|
|c) Choosing the best builder||5|
|d) Identify the stakeholders for the project||5|
|2||a) Factors that will influence the design and layout of your dream home are thoroughly discussed||5|
|b) Project management processes that are used for 2(a) are explained in detail||5|
|3||Detailed explanations are provided to achieve lean project management for this initiative.||10|
|4||Clarity of expression, grammar, spelling and correct APA style referencing||4|
|Assessment Due Date||On or before 23:55 hrs AEST Week 9, Friday (20 September, 2019)|
Formatting. The writeup should be presented in 1.5 line spacing, 12 point Times New Roman font. Answer each question with proper heading (see below):
1a) The choice of the suburb was based on ….Several project management processes were used
1b) The land size was decided based on….
This assessment item involves researching your assigned topic to enhance your understanding of lean project management concepts and utilisation of academic literature. Whilst you use the recommended textbooks and lecture materials, you may also refer to relevant peer reviewed, academic journal articles. A reference list formatted in the prescribed APA style is compulsory. PPMP20009 Leading Lean Project
General Assessment Criteria
Incomprehensible submissions. Assessments provide the opportunity for students to demonstrate their knowledge and skills to achieve the required standard. To do this, assessment responses need to be both clear and easy to understand. If not, the University cannot determine that students have demonstrated their knowledge and skills. Assessments will, therefore, be marked according to the marking criteria (accompanied by the marking rubric). Failing to meet the requirements may result in 0 (zero) marks where relevant.
Do not reproduce statements from PMBOK or PRINCE2 or any other references without proper context.
Leadership is knowledge, skills, and behavior required to guide, motivate and direct a team to achieve its business goals (copied from page 56 of PMBOK), as this is considered plagiarism, instead you must show how you would apply that statement to your case.
PMBOK version 6 constitutes 10 knowledge areas, 5 process groups and 49 process activities or PRINCE2 consists of 7 Principles, 7 Themes and 7 Processes.
Produce your answers for the case in question. DO NOT write about the theory or explain what PMBOK, PRINCE2, DMAIC methodology, etc covers. That will not attract any marks. You should demonstrate the application of the best practices not the theory.
Discuss with your lecturer / tutor if you need help.
Word count limit (excluding references and appendix). Your submission should be made using a Microsoft WORD document of 2,500 – 3,000 words. Text length less than 2500 words will be penalised by 5% of the total available marks while text beyond the 3000 word limit will attract a penalty as follows:
- 3001 – 3300 words: 5 marks
- 3301 – 3600 words: 10 marks
- more than 3601 words: 15 marks
Late penalty. Late submissions will attract penalties at 5% for each calendar day or part thereof that it is late of the total available mark for the individual assessment item. This means that, for an assessment worth 40 marks, the mark that you earn is reduced by 2 marks each calendar day that the assessment is late (including part-days and weekends). See s4.58 in the Assessment Policy and Procedure (Higher Education Coursework).
Check with marking criteria. Before submitting your assignment you should check it against the assessment criteria and the marking rubric included in this specification to ensure that you have satisfactorily addressed all the criteria that will be used to mark your assignment.
Academic language. All submissions should be thoroughly proof-read for spelling, typographical or grammatical errors before being submitted. Do not reply on the ‘spell-check’ function in your word processing program. If, for example, ‘affect’ is substituted for ‘effect’, your program may not detect the error. PPMP20009 Leading Lean Project
All assignments will be checked for plagiarism (material copied from other students and/or material copied from other sources) using TurnItIn (TII). If you are found to have plagiarised material or if you have used someone else’s words without appropriate referencing, you will be penalised for plagiarism which could result in 0 (zero) marks for the whole assignment. In some circumstances a more severe penalty may be imposed. The link to the University’s Academic Misconduct Procedures is available in the unit profile.
Useful information about academic integrity (avoiding plagiarism) can be found at: CQ University referencing guides
You will see a link for submission of Assignment 1 in the Dashboard page and also in Week 9 for this unit in Moodle.
IT IS YOUR RESPONSIBILITY TO CHECK AND NOTIFY US IF YOU HAVE ANY ISSUES WITH THE SUBMISSION LINK FOR ASSESSMENT 2.
No Zipped files. Students must NOT zip the MS Word document or submit it as one single zip/compressed file.
Means of submission. All assignments must be submitted electronically in Moodle. The submission links can be accessed through the Assessment block on the Moodle unit website. Physical copies/Email submissions are not accepted.
Auto-submission. Moodle implements an auto-submission process for those items uploaded and left as drafts before the original deadline. However, any assessments uploaded after the original deadline must be manually submitted by the students.
Please note that auto-submission process does not work for assessments which have extensions. Auto-submission only works where the original deadline of an assessment has not changed. If you are submitting after the deadline (original or extended), you must complete the Moodle submission process. Further details on completing the submission process are available via the
‘Moodle Help for Students’ link in the SUPPORT block of your Moodle pages.
Warning. Having said that, however, you should not completely rely on Moodle’s autosubmission functionality because it has not been proved to be reliable in the past. Each student should make sure they submit their assignment before the deadline by manually clicking on the submission button. PPMP20009 Leading Lean Project
Complete and correct submission. Assignments, once submitted, are FINAL and therefore cannot be modified. Students bear all the onus to ensure that their submissions are correct (correct files in correct format) and complete before submitting to Moodle.